-40%
REBUILT TR-4 ANTENNA ROTOR,CONTROL BOX,LOWER MAST SUPPORT,ALL MOUNTING HARDWARE,
REBUILT TR-4 ANTENNA ROTOR,CONTROL BOX,LOWER MAST SUPPORT,ALL MOUNTING HARDWARE,
REBUILT TR-4 ANTENNA ROTOR,CONTROL BOX,LOWER MAST SUPPORT,ALL MOUNTING HARDWARE,
REBUILT TR-4 ANTENNA ROTOR,CONTROL BOX,LOWER MAST SUPPORT,ALL MOUNTING HARDWARE,
REBUILT TR-4 ANTENNA ROTOR,CONTROL BOX,LOWER MAST SUPPORT,ALL MOUNTING HARDWARE,
REBUILT TR-4 ANTENNA ROTOR,CONTROL BOX,LOWER MAST SUPPORT,ALL MOUNTING HARDWARE,
REBUILT TR-4 ANTENNA ROTOR,CONTROL BOX,LOWER MAST SUPPORT,ALL MOUNTING HARDWARE,
REBUILT TR-4 ANTENNA ROTOR,CONTROL BOX,LOWER MAST SUPPORT,ALL MOUNTING HARDWARE,

REBUILT TR-4 ANTENNA ROTOR,CONTROL BOX,LOWER MAST SUPPORT,ALL MOUNTING HARDWARE,

$ 40.12

Availability: 100 in stock
  • Number of Inputs: 4
  • Features: Motorized Rotation
  • Type: ANTENNA ROTOR
  • Model: TR-4
  • Condition: THIS ROTOR WAS CLEANED,TESTED,REMOVED THE OLD STYLE BEARING CARRIER ,INSTALLED NEW STYLE CARRIER AND 98 NEW BEARRING REPLACED DRIVE GEAR
  • Brand: CDE TR-4
  • All returns accepted: ReturnsNotAccepted
  • Number of Outputs: 4
  • Directivity: Omni-Directional

    Description

    THIS ROTOR WAS DESGINED FOR LARGE TV ANTENNAS AND SMALL BEAM ARREYS, THE EXTRA BEARINGS INSTALLED WILL ALLOW THIS ROTOR TO HANDLE A LARGER ANTENNA.  I DISMANTLED THIS ROTOR INSTALLED A FRESH MOTOR,CHECKED ALL THE GEARS FOR DEFECTS, REPLACED THE DRIVE GEAR,REPLACED THE BEARING CARRIER AND 98 NEW BEARINGS,INSTALLED A NEW SCREW TERMINAL STRIP ON THE ROTOR,GREASED WITH ALL TEMP HIGH QUALITY GREASE, PAINTED WITH HIGH QUALITY PAINT THE CONTROL BOX WAS DISMANTLED AND TESTED FOR PROPER OHMS AND VOLTAGE THE NEEDLE ON THE CONTROL DOES HAVE A SLIGHT JUMP IN ROTATION BUT THE ROTOR AND CONTROL STAYS WITH THE ROTOR DIRECTION I HAVE HAD 4 OF THESE CONTROLs AND THEY ALL SEEM DO THE SAME, I BENCH TESTED THE SYSTEM THE ROTOR AND CONTROL WORK VERY WELL AND ARE ALIGNED.   THANKS